2CSK289601R1902 ABB TR/U 1.1.CH

Onderdeel nummer	2CSK289601R1902
Merk	ABB
Levenscyclus	Actief
montage methode	Surface mounting
ingangsfrequentie	240 Pixel
golfvorm op de batterij	240 Pixel
frequentie bij werking op batterij	240 Pixel
typische oplaadtijd	240 Pixel
kleur	240 Pixel

ABB 2CSK289601R1902 technische specificaties, attributen, parameters.

The "transponder reader" is a flush-mounting device designed to realize access control systems with a communication support based on KNX bus. It is equipped with one relay (4A @24 V AC/DC) and one input to be used for connecting external conventional card-holder. The output can be programmed in three different ways: "Linked to access control", receiving in this case switching commands from the device itself (according to transponder card validation); being a standard KNX Switch actuator output, able to be controlled by every KNX standard devices; "linked to card-holder", that means that the relay is switched according to closing/opening internal input contact available on transponder reader. The bicolor (red-green) LED placed on the front of the device allow you to monitor device operation and can be also switched ON/OFF in the proper color according to KNX telegram (for example for DND/MUR purposes). The transponder reader can be configured with MiniMAC software in order to behave as transponder programming device. The transponder reader requires a 12...24 V AC/DC external power supply to ensure its operation even with bus voltage failure.